09:00 a.m. - 04:00 p.m.

Welcome and Introduction

Basics in Electrosurgery 

• Terminology 
• Application and risk
• Commissioning  
• Procedure for vigilance cases 

HF Measuring Technique

(DIN EN 60601-1 / DIN EN 60601-2-2 / DIN EN 62353) 

• Safety check acc. to the MDD    
  • Measuring devices: 
    • Electrosurgical power meter 
    • Safety tester 
    • Measuring adapter 
• HF power 
• HF leakage current
• Safety control 
• Isolation and protection earth measurement 
• Earth – enclosure – patient – leakage current
• Auxiliary current 
• Calibration 

Schematic | Exchange and Trouble Shooting 

• maXium®
• maXium® smart C
• marVac®
• Argon Beamer

09:00 a.m. - 04:00 p.m.

Basics in Light Engineering

• Color temperature
• Color rendering index
• Temperature increase
• Depth of illumination
• Luminous efficiency
• Modelling (small/large light field) | Depth illumination and depth modelling
• Measuring technique illumination (Lux)
• Procedure for vigilance cases

Installation of the "Sub-Construction / Heavy Duty Anchors" 

• Legal aspects
• Overview
• Different surfaces
• Correct preparation
• Torque test
• Axial and edge distance
• Heavy-duty anchors (HST)
• 10 golden rules

OR Light Installation

• Requirements (real and false ceiling, supply voltage, wiring etc.)
• Certificate of static load capacity of ceiling
• Commissioning  

Measuring Technique

(DIN EN 60601-1 / DIN EN 60601-2-2 / DIN EN 62353) 

Safety check acc. to the MDD 

Schematics of the marLED® V series

marLED® V10 / V16 

• Troubleshooting and exchange of complete printed circuit boards
• Software update 
• Maintenance, adjusting, measuring technique 

Schematics of the marLED® E Series

marLED® E3, E9, E9i and E15 
marLED® E Battery 

• Troubleshooting and exchange of complete printed circuit boards
• Software update 
• Maintenance, adjusting, measuring technique 

Schematics of the marLED® X 

marLED® X

• Troubleshooting and exchange of complete printed circuit boards
• Software update 
• Maintenance, adjusting, measuring technique 

9:00 a.m. - 12:00 p.m.

Schematics of the OR Lights / Video System  

• Flat screen monitor system TFT FS / TFT marView
• surgiCam^_® SD and HD 
• Scale OR 
• Conduct OR 
• S video amplifier 
• Troubleshooting and exchange of complete printed circuit boards
• Maintenance, adjusting, measuring technique 

Replacing "old" ML / marLUX Light heads with new marLED® V and marLED® E Light heads

• Checklist for the modification
• Exel - Configurator
• Commissioning

01:30 p.m. - 04:00 p.m.

Basics in gas supply 

• Requirements Surgical Pendant
• Requirements Anaesthesia Pendant
• Gas Norms:
  • British Norm (HTM 2022) with NIST – Connection
  • EN 737
  • Colour coded hoses
• Gas media check
• Procedure for Vigilance Cases

Installation of the "sub - Construction / heavy duty anchors"

• Legal aspects
• Overview
• Different surfaces
• Correct preparation
• Torque test
• Axial and edge distance
• Heavy-duty anchors (HST)
• 10 Golden Rules

Pendant Installation

• Requirements (real and false ceiling)
• Requirements Gas – Supply
  • Diameter of the gas tubing
  • Gas – Interface with NIST – Connection
  • Gas – Interface without NIST – Connection
• Certificate of Static Load Capacity of Ceiling
• Commissioning 

Measuring technique (DIN EN 60601-1 / DIN EN 60601-2-2 / DIN EN 62353)

• Inspection
• Gas – media Check

Trouble Shooting & Maintenance

• Replacing components
• Maintenance, adjusting 

Product Training

• Product Training
  • independant® 101 M, airplus, S, S airplus , XL 
  • independant® 201 M
  • independant® 301 air
  • independant® 401 / inverted
  • independant® 501 XL XXL
  • Service Head M 6
  • independant® Flex S – Vertical
  • independant® Flex S – Horizontal 
  • independant® Flex M – Vertical 
  • independant® Care Horizontal ES 
  • independant® Care Horizontal MD  
  • independant® Care Horizontal LG  
  • independant® Care Vertical ES 
  • independant® Care Vertical MD 
  • independant® Care Vertical LG 

1. The training concerns only electromedical products.

Target Groups: 

Technicians and Service Engineers of our Distributors

Technicians and Service Engineers of our Service Partners

2. Registration for each module has to be done at least 1 weeks before the training starts.

3. The number of participants shall be at least 5 and shall not exceed 12 participants.

4. Each participant will obtain a certificate.

Please note:
A test will be performed after each training unit.

• The course organizer reserves the right to cancel an event due to low enrollment or other  circumstances which would make the course non-viable until 1 weeks prior to the training date.
• If the organizer cancels a course, registrants will be offered a full refund of registration fees. 
• Should circumstances arise that result in postponement of a course, the organizer has the right to either issue a full refund or registration to the same event at the new, future date.

• The deadline to receive a refund for your registration is 1 weeks before the course.
• Cancellations received after the stated deadline will not be eligible for a refund.
• Refunds will not be available for registrants who choose not to attend the course. 
• Cancellations will be accepted in writing only and must be received by the stated cancellation deadline. When writing your cancellation please include the details of your credit card or bank  details (SWIFT / IBAN).