Art. No. 38-791-03-07
Osteotome, acc. to Dunn-Dautrey, strongly curved, width 6 mm, total length 17 cm
Art. No. 38-797-04-07
Osteotome, acc. to Epker, curved, width 4 mm, total length 18 cm
Art. No. 38-810-01-07
Spatula osteotome, acc. to Urata, working end width 3.7 mm, total length 15 cm
Art. No. 38-810-02-07
Spatula osteotome, acc. to Martini, working end width 4.5 mm, total length 15 cm
Art. No. 38-837-01-07
Periosteal Elevator, acc. to Hargis, right, width 6.5 mm, total length 23.5 cm
Art. No. 38-839-18-07
Piriformis hook, acc. to Hargis, 45 mm x 7 mm, total length 18.5 cm
Art. No. 38-846-20-07
Ramus separator, acc. to Smith, total length 23.5 cm
Art. No. 38-856-19-07
Septal osteotome, acc. to Terry, total length 19 cm
Art. No. 38-870-17-07
Madibular retractor, acc. to Turvey, total length 17 cm
Art. No. 38-875-18-07
Elevator, acc. to Steinhäuser, strongly curved, total length 18.5 cm
Art. No. 38-883-07-07
Chisel, acc. to Steinhäuser, width 7 mm, total length 19 cm
Art. No. 38-883-15-07
Chisel, acc. to Steinhäuser, width 15 mm, total length 19 cm
Art. No. 38-885-18-07
Reduction instrument, acc. to Steinhäuser, width 6 mm, total length 18 cm
Art. No. 38-895-08-07
Orbita osteotome, acc. to Steinhäuser, width 8 mm, total length 18 cm
Art. No. 38-899-06-07
Osteotome, acc. to Wolford, angled, width 6 mm, total length 21.5 cm
Art. No. 39-003-18-07
Cleft palate hooklet, acc. to Salyer, long, angled, width 5.5 mm, length 18 cm
Art. No. 39-027-18-07
Cleft palate elevator, acc. to Salyer, graduated, angled, width 2.9 mm, length 18 cm
Art. No. 39-101-18-07
Palatal raspatory, left curved, width 4 mm, length 14 cm
Art. No. 39-102-18-07
Palatal raspatory, right curved, width 4 mm, length 14 cm
Art. No. 39-139-21-07
Palatal needle, acc. to Hurd, left, length 20.5 cm
Art. No. 39-220-22-07
Tonsil knife, acc. to Fisher, length 22.5 cm
Art. No. 39-311-19-07
Gauze packer, acc. to Luniatschek, width 3 mm/ 3 mm, length 17.5 cm
Art. No. 39-506-92-98
Feather alone to tonsil snare
Art. No. 39-511-40-07
Wire loop for tonsil snares, pack of 100 pieces, Ø 40 x 0.3 mm
Art. No. 39-525-01-07
Tonsil snare, acc. to Tyding, with one straight tip
Art. No. 39-541-13-07
Tonsil forceps, acc. to Hartmann, cutting through, shaft length 120 mm, cut Ø 13 mm
Art. No. 39-584-90-98
Inner part for extension tube 39-584-20
Art. No. 39-587-20-07
Extension tube, according to Brünings, curved, length 18 cm
Art. No. 39-604-01-07
Tip for laryngo forceps, acc. to Seiffert, coarsely grooved, cutting width 2.5 mm
Art. No. 39-616-02-07
Tip for laryngo forceps, acc. to Brünings, Figure 2, cut Ø 3 mm
Art. No. 39-618-02-07
Tip for laryngo forceps, acc. to Brünings, Figure 2, lengthwise, cutting width 2 mm
Art. No. 39-632-01-07
Tip for laryngo forceps, acc. to Krause, with high arch, cutting width 4.5 mm
Art. No. 39-782-08-04
Laryngeal mirror, rhodium-plated, flat, with fixed handle, figure 00, Ø 8 mm, length 18.5 cm
Art. No. 39-782-10-04
Laryngeal mirror, rhodium-plated, flat, with fixed handle, figure 0, Ø 10 mm, length 18.5 cm
Art. No. 39-782-24-04
Laryngeal mirror, rhodium-plated, flat, with fixed handle, figure 7, Ø 24 mm, length 18.5 cm
Art. No. 39-786-16-04
Laryngeal mirror, rhodium-plated, flat, without handle, figure 3, Ø 16 mm, length 13.5 cm
Art. No. 39-786-18-04
Laryngeal mirror, rhodium-plated, flat, without handle, figure 4, Ø 18 mm, length 13.5 cm
Art. No. 39-789-18-02
Laryngeal mirror, acc. to Michel, moveable mirror, figure 4, Ø 18 mm
Art. No. 40-002-00-07
Extracting forceps, English pattern, upper jaw, figure 2, for incisors and biscuspids, width 4.6 mm
Art. No. 40-017-00-07
Extracting forceps, English pattern, upper jaw, figure 17, for molars, right, width 7.6 mm
Art. No. 40-023-00-07
Extracting forceps, English pattern, lower jaw, figure 23, for molars, right, width 6.7 mm
Art. No. 40-024-00-07
Extracting forceps, English pattern, lower jaw, figure 24, for molars, left, width 6.7 mm
Art. No. 40-029-00-07
Extracting forceps, English pattern, upper jaw, figure 29, for roots and incisors, width 3.2 mm
Art. No. 40-033-00-07
Extracting forceps, English pattern, lower jaw, figure 33, for roots, width 4.6 mm
Art. No. 40-034-00-07
Extracting forceps, English pattern, upper jaw, figure 34 N, for incisors and biscuspids, deep-gripping, width 3.0 mm
Art. No. 40-067-00-07
Extracting forceps, English pattern, upper jaw, figure 67, for third molars, width 6.9 mm
Art. No. 40-067-01-07
Extracting forceps, English pattern, upper jaw, figure 67 A, for third molars, width 7.6 mm
Art. No. 40-074-06-07
Extracting forceps, English pattern, lower jaw, figure 74 N, for incisors and roots, width 3.1 mm